Industries · Metalworking and engineering

Custom software for machine shops

A customer's drawing asks for materials, tolerances and finishes. The system reads them and sets them against what your shop can do, so the quote starts from a base that is already checked.

Example the system checks a drawing's tolerances against your machines

Alfa MachiningRFQ-318 · flange FL-210

Drawing tolerances and the shop's machines

Ø40 H7Centre boreBoring mill AL-2
0.02Bore-to-outside concentricityLathe TN-1
0.03Face flatnessMachining centre CL-3
Ra 0.4Face roughnessNo machine holds it: needs an outside shop
Your machines hold three of the four tolerances. The face finish would go to an outside shop: you decide whether to quote.

Example, for a made-up shop and customer.

From request to delivery

Where a job loses time

Request for quotation

TodayThree drawings and an email: only one estimator can read them, and the quote sits for days.

With the systemThe system reads the request and drawings, pulls out materials and critical tolerances, and prepares the groundwork for the quote.

Order and drawings

TodayDrawings circulate in several revisions, and the shop floor can cut to the wrong one.

With the systemThe order, the latest revision and the certificates attach themselves to the job.

Machine load

TodayDates are promised by gut feel and turn out wrong halfway through the job.

With the systemMachines, outside processing and returns sit on one calendar: the date is one the shop can keep.

Material check

TodaySteel below its minimum strength is found once the part is finished.

With the systemThe certificate is read at unloading and checked against the order, before the load is accepted.

Delivery

TodayWhen a supplier runs late, nobody knows which deliveries are affected.

With the systemYou see at once which jobs slip, before the customer asks.

How we work

  1. 01

    Measure

    We listen to the people who do the work, on your real documents.

  2. 02

    Design

    The system in modules, highest value first.

  3. 03

    Build

    One module at a time, checked. Then we stay with it.

Tell us the problem
in two lines.

Let's talkWe reply by hand. Or write to [email protected]